4 open source boards using the QPL9547TR7
Real designs built with the QPL9547TR7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Expansion board v4
naizhao
100 × 62 mm213 parts6LMIT11Nordic nRF
BEACON PhoneModule
Matthew-Marsicano
55 × 78.5 mm143 parts4LNo license2Iq mod
gallicchio
100 × 100 mm186 parts4LCERN-OHL-P-2.00Rf mod
gallicchio
100 × 100 mm168 parts4LCERN-OHL-P-2.00
The QPL9547TR7 in open source designs
The gallery holds 4 open source boards using the QPL9547TR7 from 3 GitHub repositories; a typical one measures about 100 × 89.2 mm and carries around 177 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Expansion board v4 by naizhao.
Parts used alongside the QPL9547TR7
Microcontrollers on boards using the QPL9547TR7
What boards using the QPL9547TR7 are built for
QPL9547TR7: common questions
Where can I find a QPL9547TR7 reference design?
Each of the 4 boards on this page is a real design using the QPL9547TR7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the QPL9547TR7 use?
Most are built on Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the QPL9547TR7?
The median is 100 × 89.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the QPL9547TR7?
By GitHub stars, Expansion board v4 by naizhao, with 11 stars.
Can I simulate one of these boards using the QPL9547TR7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.