2 open source boards using the RP235x-B
Real designs built with the RP235x-B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiRp2350 stamp xl hw
solderparty
45 × 25 mm41 parts4LCERN-OHL-1.243
Raspberry PiRP235X-B-Evaluator
Oak-Development-Technologies
50 × 50 mm61 parts4LCERN-OHL-P-2.06
The RP235x-B in open source designs
The gallery holds 2 open source boards using the RP235x-B from 2 GitHub repositories; a typical one measures about 47.5 × 37.5 mm and carries around 51 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Rp2350 stamp xl hw by solderparty.
Microcontrollers on boards using the RP235x-B
What boards using the RP235x-B are built for
RP235x-B: common questions
Where can I find a RP235x-B reference design?
Each of the 2 boards on this page is a real design using the RP235x-B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RP235x-B use?
Most are built on Raspberry Pi (2).
How big is a typical board using the RP235x-B?
The median is 47.5 × 37.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the RP235x-B?
By GitHub stars, Rp2350 stamp xl hw by solderparty, with 43 stars.
Can I simulate one of these boards using the RP235x-B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.