4 open source boards using the S70KS128
Real designs built with the S70KS128, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350PicoStation3D
Wren6991
100 × 50 mm74 parts4LCC0-1.050
Pmod hyperram
15 × 42 mm7 parts2LBSD-3-Clause1.5k
Pmod hyperram
RafaGS
15 × 42 mm7 parts2LMIT19
Pmod hyperram
Adrian13985
15 × 42 mm7 parts2LNo license0
The S70KS128 in open source designs
The gallery holds 4 open source boards using the S70KS128 from 4 GitHub repositories; a typical one measures about 15 × 42 mm and carries around 7 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Pmod hyperram by Wren6991.
Microcontrollers on boards using the S70KS128
What boards using the S70KS128 are built for
S70KS128: common questions
Where can I find a S70KS128 reference design?
Each of the 4 boards on this page is a real design using the S70KS128. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the S70KS128 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the S70KS128?
The median is 15 × 42 mm, and 75% are two-layer designs.
What is the most popular open source board using the S70KS128?
By GitHub stars, Pmod hyperram by Wren6991, with 1,509 stars.
Can I simulate one of these boards using the S70KS128 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.