2 open source boards using the SCD30
Real designs built with the SCD30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ENV-sensor esp32
bruvv
55 × 70 mm9 parts4LGPL-3.00RP2040/RP2350
SensorPod-Board
plb500
13.3 × 31 mm17 parts2LNo license0
The SCD30 in open source designs
The gallery holds 2 open source boards using the SCD30 from 2 GitHub repositories; a typical one measures about 34.2 × 50.5 mm and carries around 13 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is SensorPod-Board by plb500.
Microcontrollers on boards using the SCD30
What boards using the SCD30 are built for
SCD30: common questions
Where can I find a SCD30 reference design?
Each of the 2 boards on this page is a real design using the SCD30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SCD30 use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the SCD30?
The median is 34.2 × 50.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the SCD30?
By GitHub stars, SensorPod-Board by plb500, with 0 stars.
Can I simulate one of these boards using the SCD30 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.