6 open source boards using the SIP32408DNP-T1-GE4
Real designs built with the SIP32408DNP-T1-GE4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
KiCAD-CY8CPROTO-063-BLE PSoC 6
Haxous742
102.2 × 26.7 mm109 parts2LMIT1NXP
Tpu electricals
starbelt
43 × 43 mm210 parts8LMIT0Cartouche usb4
Cartouche-IA
22 × 33.7 mm134 parts4LMIT0Cartouche usb4
opencorp2030-ctrl
22 × 33.7 mm134 parts4LMIT0Upstream import
Cartouche-IA
22 × 33.7 mm134 parts4LMIT0Upstream import
opencorp2030-ctrl
22 × 33.7 mm134 parts4LMIT0
The SIP32408DNP-T1-GE4 in open source designs
The gallery holds 6 open source boards using the SIP32408DNP-T1-GE4 from 4 GitHub repositories; a typical one measures about 22 × 33.7 mm and carries around 134 components.
83% use four copper layers or more, and 100% carry an open source license.
The most starred is KiCAD-CY8CPROTO-063-BLE PSoC 6 by Haxous742.
Parts used alongside the SIP32408DNP-T1-GE4
Microcontrollers on boards using the SIP32408DNP-T1-GE4
What boards using the SIP32408DNP-T1-GE4 are built for
SIP32408DNP-T1-GE4: common questions
Where can I find a SIP32408DNP-T1-GE4 reference design?
Each of the 6 boards on this page is a real design using the SIP32408DNP-T1-GE4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SIP32408DNP-T1-GE4?
The ASM2464PD, LTC3315AEV#TRPBF, temp_T_004530, TPS82130SILR and ZD25WQ16CEIGR appear in the most repositories here.
Which microcontrollers do boards using the SIP32408DNP-T1-GE4 use?
Most are built on NXP (1).
How big is a typical board using the SIP32408DNP-T1-GE4?
The median is 22 × 33.7 mm, and 17% are two-layer designs.
What is the most popular open source board using the SIP32408DNP-T1-GE4?
By GitHub stars, KiCAD-CY8CPROTO-063-BLE PSoC 6 by Haxous742, with 1 stars.
Can I simulate one of these boards using the SIP32408DNP-T1-GE4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.