7 open source boards using the TPS82130SILR

Real designs built with the TPS82130SILR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TPS82130SILR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS82130SILR connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 22 µF).
  • The VOUT pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 µF).
  • The FB pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ (then 150 kΩ).
  • The SS/TR pin has a capacitor to GND on 5 of 5 designs, most often 3.3 nF (then 430 pF).
ENpin 1Connected to: Signal 60% · 5V 40%
  • Capacitor to GND on 40% · 10 µF (3), 1 µF (2), 100 nF (1)
  • Pull-up to VBUS1 on 40% · 10 kΩ (2)
VINpin 2Connected to: VBUS1 100%
  • Decoupling capacitor on 100% · 10 µF (5), 22 µF (1), 100 nF (1)
GNDpin 3, 9Connected to: GND 100%
VOUTpin 4, 5Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (14), 22 µF (7), 1 µF (6)
FBpin 6Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (2), 150 kΩ (2), 24 kΩ (1)
  • Pull-up to 3.3V on 80% · 475 kΩ (2), 316 kΩ (1), 75 kΩ (1)
PGpin 7Connected to: Not connected 100%
SS/TRpin 8Connected to: Signal 100%
  • Capacitor to GND on 100% · 3.3 nF (3), 430 pF (1), 10 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Picard by weiiwang01, Benchpod by embeddedci-com, Cartouche usb4 by Cartouche-IA and Cartouche usb4 by opencorp2030-ctrl.

The TPS82130SILR in open source designs

The gallery holds 7 open source boards using the TPS82130SILR from 5 GitHub repositories; a typical one measures about 22 × 33.7 mm and carries around 134 components.

100% use four copper layers or more, and 71% carry an open source license.

The most starred is Picard by weiiwang01.

Microcontrollers on boards using the TPS82130SILR

What boards using the TPS82130SILR are built for

TPS82130SILR: common questions

Where can I find a TPS82130SILR reference design?

Each of the 7 boards on this page is a real design using the TPS82130SILR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS82130SILR VIN pin?

The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the TPS82130SILR.

What decoupling capacitors do designs use on the TPS82130SILR VOUT pin?

The VOUT pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the TPS82130SILR.

What resistor goes on the TPS82130SILR FB pin?

The FB pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ (then 150 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS82130SILR.

What parts are used alongside the TPS82130SILR?

The ASM2464PD, LTC3315AEV#TRPBF, SIP32408DNP-T1-GE4, temp_T_004530 and TPS259470ARPWR appear in the most repositories here.

Which microcontrollers do boards using the TPS82130SILR use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the TPS82130SILR?

The median is 22 × 33.7 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS82130SILR?

By GitHub stars, Picard by weiiwang01, with 8 stars.

Can I simulate one of these boards using the TPS82130SILR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part