2 open source boards using the SN74AUP1T97
Real designs built with the SN74AUP1T97, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
DogTracker
angiet642
100 × 53.9 mm22 parts4LNo license0DogTracker
krsandwich
100 × 53.9 mm22 parts4LNo license0
The SN74AUP1T97 in open source designs
The gallery holds 2 open source boards using the SN74AUP1T97 from 2 GitHub repositories; a typical one measures about 99.9 × 53.9 mm and carries around 22 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is DogTracker by angiet642.
Parts used alongside the SN74AUP1T97
SN74AUP1T97: common questions
Where can I find a SN74AUP1T97 reference design?
Each of the 2 boards on this page is a real design using the SN74AUP1T97. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SN74AUP1T97?
The 3857, ADP160AUJZ-1.8-R7, LSM6DSO32, Origin_GPS1510 and SX1280IMLTRT appear in the most repositories here.
How big is a typical board using the SN74AUP1T97?
The median is 99.9 × 53.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74AUP1T97?
By GitHub stars, DogTracker by angiet642, with 0 stars.
Can I simulate one of these boards using the SN74AUP1T97 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.