8 open source boards using the LSM6DSO32
Real designs built with the LSM6DSO32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Soldered Inkplate 6 MOTION
SolderedElectronics
144.4 × 107.8 mm313 parts2LTAPR-OHL-1.04STM32
NoNameComputer-2.0
PlanAndBuild
40 × 100 mm107 parts4LNo license2ESP32
Self landing rocket
npsggehlot-cmyk
70 × 70 mm94 parts4LNo license0STM32
Fjalar flight controller
aesirkth
35.1 × 77 mm84 parts4LNo license0DogTracker
krsandwich
100 × 53.9 mm22 parts4LNo license0DogTracker
angiet642
100 × 53.9 mm22 parts4LNo license0Arduino uno q robotics
Sunewst
68.6 × 53.3 mm15 parts4LNo license0ESP32
Soldered Inkplate 6 MOTION panel
SolderedElectronics
144.4 × 221.6 mm313 parts2LTAPR-OHL-1.04
How designs wire the LSM6DSO32
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LSM6DSO32 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
- The SDX pin is tied to GND on 5 of 7 designs (not connected on 2).
- The SCX pin is tied to GND on 5 of 7 designs (not connected on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDXpin 2 | Connected to: GND 71% · not connected 29% | — |
| SCXpin 3 | Connected to: GND 71% · not connected 29% | — |
| VDDIOpin 5 | Connected to: 3.3V 100% |
|
| GNDpin 6, 7 | Connected to: GND 100% | — |
| VDDpin 8 | Connected to: 3.3V 100% |
|
| NCpin 10, 11 | Connected to: Not connected 100% | — |
| SCLpin 13 | Connected to: 3857 29%, SX1280IMLTRT 29%, a connector 29% |
|
| SDApin 14 | Connected to: 3857 29%, SX1280IMLTRT 29%, a connector 29% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Soldered Inkplate 6 MOTION by SolderedElectronics, NoNameComputer-2.0 by PlanAndBuild, Fjalar flight controller by aesirkth and DogTracker by angiet642.
The LSM6DSO32 in open source designs
The gallery holds 8 open source boards using the LSM6DSO32 from 7 GitHub repositories; a typical one measures about 85 × 73.5 mm and carries around 89 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is Soldered Inkplate 6 MOTION by SolderedElectronics.
Parts used alongside the LSM6DSO32
What boards using the LSM6DSO32 are built for
LSM6DSO32: common questions
Where can I find a LSM6DSO32 reference design?
Each of the 8 boards on this page is a real design using the LSM6DSO32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LSM6DSO32 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the LSM6DSO32.
What decoupling capacitors do designs use on the LSM6DSO32 VDD pin?
The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the LSM6DSO32.
How is the LSM6DSO32 SDX pin connected?
The SDX pin is tied to GND on 5 of 7 designs (not connected on 2). Counted from the KiCad layouts of 7 open source designs using the LSM6DSO32.
What parts are used alongside the LSM6DSO32?
The 3857, ADP160AUJZ-1.8-R7, MS5611-01BA, Origin_GPS1510 and SN74AUP1T97 appear in the most repositories here.
Which microcontrollers do boards using the LSM6DSO32 use?
Most are built on ESP32 (3) and STM32 (2).
How big is a typical board using the LSM6DSO32?
The median is 85 × 73.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the LSM6DSO32?
By GitHub stars, Soldered Inkplate 6 MOTION by SolderedElectronics, with 4 stars.
Can I simulate one of these boards using the LSM6DSO32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.