3 open source boards using the SN74LV1T04
Real designs built with the SN74LV1T04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LimeRFE
myriadrf
141.1 × 178.5 mm1325 partsNo license28AVR/Arduino
Master
cactorium
47.4 × 32.6 mm45 parts2LMIT0TI MSP430/CC
Servos
cactorium
40.4 × 54.2 mm18 parts2LMIT0
The SN74LV1T04 in open source designs
The gallery holds 3 open source boards using the SN74LV1T04 from 2 GitHub repositories; a typical one measures about 47.3 × 54.2 mm and carries around 45 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is LimeRFE by myriadrf.
Microcontrollers on boards using the SN74LV1T04
What boards using the SN74LV1T04 are built for
SN74LV1T04: common questions
Where can I find a SN74LV1T04 reference design?
Each of the 3 boards on this page is a real design using the SN74LV1T04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LV1T04 use?
Most are built on AVR/Arduino (2) and TI MSP430/CC (1).
How big is a typical board using the SN74LV1T04?
The median is 47.3 × 54.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN74LV1T04?
By GitHub stars, LimeRFE by myriadrf, with 28 stars.
Can I simulate one of these boards using the SN74LV1T04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.