7 open source boards using the SN74LVC1G04DCKR
Real designs built with the SN74LVC1G04DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ovc
osrf
230 × 56 mm379 parts6LApache-2.0207OreSat Live Card
oresat
99.8 × 94.6 mm314 parts4LGPL-3.017SCART switcher
nunosousa
255 × 127 mm595 parts4LNo license0ESP32
Nescart
Keitark
99.7 × 63.9 mm84 parts6LMIT0ESP32
Nescart fc Rev A-FC
Keitark
90 × 66.8 mm80 parts6LMIT0T41-RF-board-V012.8
DRWJSCHMIDT
100 × 100 mm164 parts4LNo license64Ovc4
osrf
95 × 73 mm180 parts6LApache-2.0207
How designs wire the SN74LVC1G04DCKR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G04DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The NC_1 pin is left unconnected on 4 of 4 designs.
- The VCC pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF (then 100 pF).
- Pin 4 has a series resistor on 2 of 4 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NC_1pin 1 | Connected to: Not connected 100% | — |
| GNDpin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 3.3V 75% · a signal 25% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc by osrf, T41-RF-board-V012.8 by DRWJSCHMIDT, OreSat Live Card by oresat and Nescart by Keitark.
The SN74LVC1G04DCKR in open source designs
The gallery holds 7 open source boards using the SN74LVC1G04DCKR from 5 GitHub repositories; a typical one measures about 99.8 × 73 mm and carries around 180 components.
100% use four copper layers or more, and 71% carry an open source license.
The most starred is Ovc by osrf.
What boards using the SN74LVC1G04DCKR are built for
SN74LVC1G04DCKR: common questions
Where can I find a SN74LVC1G04DCKR reference design?
Each of the 7 boards on this page is a real design using the SN74LVC1G04DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74LVC1G04DCKR NC_1 pin connected?
The NC_1 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G04DCKR.
What decoupling capacitors do designs use on the SN74LVC1G04DCKR VCC pin?
The VCC pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G04DCKR.
What resistor goes on the SN74LVC1G04DCKR pin 4?
Pin 4 has a series resistor on 2 of 4 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G04DCKR.
Which microcontrollers do boards using the SN74LVC1G04DCKR use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the SN74LVC1G04DCKR?
The median is 99.8 × 73 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC1G04DCKR?
By GitHub stars, Ovc by osrf, with 207 stars.
Can I simulate one of these boards using the SN74LVC1G04DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.