2 open source boards using the SN74LVC1G07
Real designs built with the SN74LVC1G07, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
DronPi
radioelf
71.8 × 50.9 mm135 parts2LNo license1AVR/Arduino
Pjcontroller
jdeguire
110.5 × 104.1 mm87 parts2LGPL-3.00
The SN74LVC1G07 in open source designs
The gallery holds 2 open source boards using the SN74LVC1G07 from 2 GitHub repositories; a typical one measures about 91.2 × 77.5 mm and carries around 111 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is DronPi by radioelf.
Microcontrollers on boards using the SN74LVC1G07
What boards using the SN74LVC1G07 are built for
SN74LVC1G07: common questions
Where can I find a SN74LVC1G07 reference design?
Each of the 2 boards on this page is a real design using the SN74LVC1G07. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC1G07 use?
Most are built on AVR/Arduino (1) and Raspberry Pi (1).
How big is a typical board using the SN74LVC1G07?
The median is 91.2 × 77.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN74LVC1G07?
By GitHub stars, DronPi by radioelf, with 1 stars.
Can I simulate one of these boards using the SN74LVC1G07 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.