7 open source boards using the SN74LVC1G123DCUR
Real designs built with the SN74LVC1G123DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Dough133
chl33
69.9 × 44.5 mm59 parts4LMIT2ESP32
Q2-v2
0x616c6f6e
46 × 76 mm192 parts6LNo license0ESP32
MagMouse
sbarisic
60 × 95 mm273 parts4LCustom license2Neuromorphic ir sensor compact
RyanHailey21
30 × 30 mm97 parts4LNo license0ESP32
Main
sbarisic
80 × 125 mm207 parts4LCustom license2Peak holder
umn-impish
70 × 38 mm73 parts4LMPL-2.01Upper
sbarisic
70 × 100 mm81 parts2LCustom license2
How designs wire the SN74LVC1G123DCUR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G123DCUR connects to, and the resistors, capacitors and other passives placed on it.
- The CEXT pin has a series capacitor on 5 of 5 designs, most often 1 µF (then 100 nF).
- The REXT/CEXT pin has a series capacitor on 5 of 5 designs, most often 1 µF (then 100 nF).
- The REXT/CEXT pin has a pull-up to 3.3V on 5 of 5 designs, most often 100 kΩ (then 10 kΩ).
- The A pin is tied to GND on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Apin 1 | Connected to: GND 80% · a signal 20% | — |
| Bpin 2 | Connected to: The microcontroller 40% · 3.3V 20% |
|
| CLRpin 3 | Connected to: 3.3V 60% · a signal 40% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| Qpin 5 | Connected to: Signal 100% |
|
| CEXTpin 6 | Connected to: Signal 100% |
|
| REXT/CEXTpin 7 | Connected to: Signal 100% |
|
| VCCpin 8 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dough133 by chl33, MagMouse by sbarisic, Peak holder by umn-impish and Q2-v2 by 0x616c6f6e.
The SN74LVC1G123DCUR in open source designs
The gallery holds 7 open source boards using the SN74LVC1G123DCUR from 5 GitHub repositories; a typical one measures about 69.8 × 76 mm and carries around 97 components.
86% use four copper layers or more, and 29% carry an open source license.
The most starred is MagMouse by sbarisic.
Microcontrollers on boards using the SN74LVC1G123DCUR
What boards using the SN74LVC1G123DCUR are built for
SN74LVC1G123DCUR: common questions
Where can I find a SN74LVC1G123DCUR reference design?
Each of the 7 boards on this page is a real design using the SN74LVC1G123DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74LVC1G123DCUR CEXT pin connected?
The CEXT pin has a series capacitor on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G123DCUR.
How is the SN74LVC1G123DCUR REXT/CEXT pin connected?
The REXT/CEXT pin has a series capacitor on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G123DCUR.
How is the SN74LVC1G123DCUR A pin connected?
The A pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G123DCUR.
Which microcontrollers do boards using the SN74LVC1G123DCUR use?
Most are built on ESP32 (4).
How big is a typical board using the SN74LVC1G123DCUR?
The median is 69.8 × 76 mm, and 14% are two-layer designs.
What is the most popular open source board using the SN74LVC1G123DCUR?
By GitHub stars, MagMouse by sbarisic, with 2 stars.
Can I simulate one of these boards using the SN74LVC1G123DCUR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.