5 open source boards using the SN74LVC1G32DCKR
Real designs built with the SN74LVC1G32DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Hackrf pro
greatscottgadgets
120 × 75 mm503 parts6LCERN-OHL-P-2.063AVR/Arduino
Control Box
pauladam316
123 × 116.3 mm154 parts2LNo license04-bit-Adder-Interface-Board
Shaxzodm2611
100 × 82.2 mm125 parts4LNo license0ESP32
ESPLionV1
Angus-McIntyre
45 × 35 mm114 parts4LCC-BY-SA-4.00Timing Control V1p1
sOrzada
160 × 100 mm101 parts6LCERN-OHL-W-2.00
How designs wire the SN74LVC1G32DCKR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G32DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: VCC 80% · a signal 20% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf pro by greatscottgadgets, ESPLionV1 by Angus-McIntyre, Control Box by pauladam316 and 4-bit-Adder-Interface-Board by Shaxzodm2611.
The SN74LVC1G32DCKR in open source designs
The gallery holds 5 open source boards using the SN74LVC1G32DCKR from 5 GitHub repositories; a typical one measures about 120 × 82.2 mm and carries around 125 components.
80% use four copper layers or more, and 60% carry an open source license.
The most starred is Hackrf pro by greatscottgadgets.
Microcontrollers on boards using the SN74LVC1G32DCKR
What boards using the SN74LVC1G32DCKR are built for
SN74LVC1G32DCKR: common questions
Where can I find a SN74LVC1G32DCKR reference design?
Each of the 5 boards on this page is a real design using the SN74LVC1G32DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G32DCKR VCC pin?
The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G32DCKR.
Which microcontrollers do boards using the SN74LVC1G32DCKR use?
Most are built on AVR/Arduino (1), ESP32 (1) and FPGA (1).
How big is a typical board using the SN74LVC1G32DCKR?
The median is 120 × 82.2 mm, and 20% are two-layer designs.
What is the most popular open source board using the SN74LVC1G32DCKR?
By GitHub stars, Hackrf pro by greatscottgadgets, with 63 stars.
Can I simulate one of these boards using the SN74LVC1G32DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.