4 open source boards using the SN74LVC1G74DCTR
Real designs built with the SN74LVC1G74DCTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1AIPE 48V to 24V / 1kW
FulongLi
300 × 220 mm220 parts6LNo license0ESP32
Shack Relay Matrix rev C: shack interface
PE1RGU
160 × 161 mm265 parts4LCERN-OHL-S-2.02AIPE SiC Buck Control
FulongLi
120 × 80 mm187 parts4LNo license0
The SN74LVC1G74DCTR in open source designs
The gallery holds 4 open source boards using the SN74LVC1G74DCTR from 3 GitHub repositories; a typical one measures about 230 × 190.5 mm and carries around 243 components.
100% use four copper layers or more, and 25% carry an open source license.
The most starred is Shack Relay Matrix rev C: shack interface by PE1RGU.
Parts used alongside the SN74LVC1G74DCTR
What boards using the SN74LVC1G74DCTR are built for
SN74LVC1G74DCTR: common questions
Where can I find a SN74LVC1G74DCTR reference design?
Each of the 4 boards on this page is a real design using the SN74LVC1G74DCTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC1G74DCTR use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the SN74LVC1G74DCTR?
The median is 230 × 190.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC1G74DCTR?
By GitHub stars, Shack Relay Matrix rev C: shack interface by PE1RGU, with 2 stars.
Can I simulate one of these boards using the SN74LVC1G74DCTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.