10 open source boards using the SN74LVC1G86DBVR

Real designs built with the SN74LVC1G86DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the SN74LVC1G86DBVR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74LVC1G86DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The A pin has a series resistor on 3 of 6 designs, most often 1 kΩ (then 22 kΩ).
  • The B pin has a series resistor on 3 of 6 designs, most often 1 kΩ (then 22 kΩ).
  • The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF).
Apin 1Connected to: A connector 33%
  • Series resistor on 50% · 1 kΩ (1), 22 kΩ (1)
  • Resistor to GND on 33% · 10 kΩ (2)
Bpin 2Connected to: Signal 100%
  • Series resistor on 50% · 1 kΩ (1), 22 kΩ (1)
  • Capacitor to GND on 33% · 100 nF (1), 22 pF (1)
GNDpin 3Connected to: GND 83% · a signal 17%
Ypin 4Connected to: Signal 100%
  • Series resistor on 33% · 33 Ω (1), 30 kΩ (1)
VCCpin 5Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 50% · 100 nF (3), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP Catamaran by freeDSP, BeamBender-BigBox by kavanoz64, BowelProbe by ashertok1 and AIPE 48V to 24V / 1kW by FulongLi.

The SN74LVC1G86DBVR in open source designs

The gallery holds 10 open source boards using the SN74LVC1G86DBVR from 6 GitHub repositories; a typical one measures about 161.7 × 127.5 mm and carries around 173 components.

90% use four copper layers or more, and 10% carry an open source license.

The most starred is FreeDSP Catamaran by freeDSP.

Parts used alongside the SN74LVC1G86DBVR

Microcontrollers on boards using the SN74LVC1G86DBVR

What boards using the SN74LVC1G86DBVR are built for

SN74LVC1G86DBVR: common questions

Where can I find a SN74LVC1G86DBVR reference design?

Each of the 10 boards on this page is a real design using the SN74LVC1G86DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SN74LVC1G86DBVR A pin?

The A pin has a series resistor on 3 of 6 designs, most often 1 kΩ (then 22 kΩ). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G86DBVR.

What resistor goes on the SN74LVC1G86DBVR B pin?

The B pin has a series resistor on 3 of 6 designs, most often 1 kΩ (then 22 kΩ). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G86DBVR.

What decoupling capacitors do designs use on the SN74LVC1G86DBVR VCC pin?

The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G86DBVR.

Which microcontrollers do boards using the SN74LVC1G86DBVR use?

Most are built on AVR/Arduino (1).

How big is a typical board using the SN74LVC1G86DBVR?

The median is 161.7 × 127.5 mm, and 10% are two-layer designs.

What is the most popular open source board using the SN74LVC1G86DBVR?

By GitHub stars, FreeDSP Catamaran by freeDSP, with 11 stars.

Can I simulate one of these boards using the SN74LVC1G86DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part