6 open source boards using the SN74LVC4245A
Real designs built with the SN74LVC4245A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Gbinterceptor
Staacks
130.4 × 76.6 mm48 parts2LNo license541
RP2040/RP2350Copico board
thomasshanks
100 × 96 mm52 parts2LMIT7
Drive Pack main unit hat board
synthkore
86 × 54.1 mm46 parts2LNo license2
RP2040/RP2350Gbpunk
kaybarkbark
87.5 × 70 mm76 parts2LNo license1
RP2040/RP23506502
lolakkalol
648.5 × 231.5 mm57 parts2LNo license0
PICCart prototype
alttpo
101.5 × 83 mm40 parts2LMIT0
The SN74LVC4245A in open source designs
The gallery holds 6 open source boards using the SN74LVC4245A from 6 GitHub repositories; a typical one measures about 100.8 × 79.8 mm and carries around 50 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Gbinterceptor by Staacks.
Parts used alongside the SN74LVC4245A
Microcontrollers on boards using the SN74LVC4245A
What boards using the SN74LVC4245A are built for
SN74LVC4245A: common questions
Where can I find a SN74LVC4245A reference design?
Each of the 6 boards on this page is a real design using the SN74LVC4245A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SN74LVC4245A?
The NCP1117-3.3_SOT223, RP2040 and W25Q128JVS appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC4245A use?
Most are built on RP2040/RP2350 (4) and PIC (1).
How big is a typical board using the SN74LVC4245A?
The median is 100.8 × 79.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN74LVC4245A?
By GitHub stars, Gbinterceptor by Staacks, with 541 stars.
Can I simulate one of these boards using the SN74LVC4245A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.