9 open source boards using the SPV1040TTR

Real designs built with the SPV1040TTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

The SPV1040TTR in open source designs

The gallery holds 9 open source boards using the SPV1040TTR from 3 GitHub repositories; a typical one measures about 40 × 40 mm and carries around 76 components.

78% use four copper layers or more, and 11% carry an open source license.

The most starred is PQ EPS by nanosatlab.

Parts used alongside the SPV1040TTR

Microcontrollers on boards using the SPV1040TTR

What boards using the SPV1040TTR are built for

SPV1040TTR: common questions

Where can I find a SPV1040TTR reference design?

Each of the 9 boards on this page is a real design using the SPV1040TTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SPV1040TTR use?

Most are built on RP2040/RP2350 (2) and STM32 (1).

How big is a typical board using the SPV1040TTR?

The median is 40 × 40 mm, and 22% are two-layer designs.

What is the most popular open source board using the SPV1040TTR?

By GitHub stars, PQ EPS by nanosatlab, with 9 stars.

Can I simulate one of these boards using the SPV1040TTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part