8 open source boards using the SSI2140
Real designs built with the SSI2140, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Iosefka motherboard
GlobalSequence
213 × 128.5 mm122 parts2LNo license5Josh Ox Ribbon Synth Main VCO board
JordanAceto
170.2 × 213.4 mm349 parts2LCC-BY-4.01MusicBrain VCF8-kern - 8x multimode VCF
MarkWestbroek
110 × 92 mm412 parts4LMIT0Zoxnoxious Pole Dancer Mixing Filter
brer-rabbit
80 × 80 mm150 parts4LGPL-3.068Iosefka controlboard
GlobalSequence
213 × 128.5 mm74 parts2LNo license5Josh Ox Ribbon Synth VCF/VCA/BBD board
JordanAceto
132.1 × 213.4 mm349 parts2LCC-BY-4.01403 VCF
sgreene30
58.9 × 152.4 mm71 parts4LNo license0Eurorack 4-Pole Filter
Len42
50.3 × 102.6 mm60 parts2LNo license50
How designs wire the SSI2140
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SSI2140 connects to, and the resistors, capacitors and other passives placed on it.
- The CAP2 pin has a capacitor to GND on 5 of 6 designs, most often 1 nF (then 10 µF).
- The IN2 pin has a series resistor on 5 of 6 designs, most often 10 kΩ (then 15 kΩ).
- The CAP1 pin has a capacitor to GND on 5 of 6 designs, most often 1 nF (then 10 µF).
- The IN1 pin has a series resistor on 5 of 6 designs, most often 10 kΩ (then 15 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT2pin 1 | Connected to: Signal 100% |
|
| CAP2pin 2 | Connected to: Signal 100% |
|
| IN2pin 3 | Connected to: Signal 100% |
|
| OUT1pin 4 | Connected to: Signal 83% · 15V 17% |
|
| CAP1pin 5 | Connected to: Signal 100% |
|
| IN1pin 6 | Connected to: Signal 83% · GND 17% |
|
| EXPO_CTRLpin 7 | Connected to: Signal 83% · GND 17% |
|
| TEMPCOpin 8 | Connected to: Signal 67% · not connected 17% · GND 17% |
|
| Q_OUTpin 9 | Connected to: Signal 100% |
|
| GNDpin 10 | Connected to: GND 83% · a signal 17% | — |
| V-pin 11 | Connected to: -12V 83% · a signal 17% |
|
| Q_CTRLpin 12 | Connected to: Signal 83% · GND 17% |
|
| Q_INpin 13 | Connected to: Signal 100% |
|
| OUT4pin 14 | Connected to: Signal 100% |
|
| CAP4pin 15 | Connected to: Signal 100% |
|
| IN4pin 16 | Connected to: Signal 80% · 3.3V 20% |
|
| OUT3pin 17 | Connected to: Signal 100% |
|
| CAP3pin 18 | Connected to: Signal 100% |
|
| IN3pin 19 | Connected to: Signal 100% |
|
| V+pin 20 | Connected to: 12V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zoxnoxious Pole Dancer Mixing Filter by brer-rabbit, Eurorack 4-Pole Filter by Len42, Iosefka controlboard by GlobalSequence and Josh Ox Ribbon Synth Main VCO board by JordanAceto.
The SSI2140 in open source designs
The gallery holds 8 open source boards using the SSI2140 from 6 GitHub repositories; a typical one measures about 121 × 128.5 mm and carries around 136 components.
63% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Zoxnoxious Pole Dancer Mixing Filter by brer-rabbit.
Microcontrollers on boards using the SSI2140
What boards using the SSI2140 are built for
SSI2140: common questions
Where can I find a SSI2140 reference design?
Each of the 8 boards on this page is a real design using the SSI2140. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SSI2140 CAP2 pin connected?
The CAP2 pin has a capacitor to GND on 5 of 6 designs, most often 1 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the SSI2140.
What resistor goes on the SSI2140 IN2 pin?
The IN2 pin has a series resistor on 5 of 6 designs, most often 10 kΩ (then 15 kΩ). Counted from the KiCad layouts of 6 open source designs using the SSI2140.
How is the SSI2140 CAP1 pin connected?
The CAP1 pin has a capacitor to GND on 5 of 6 designs, most often 1 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the SSI2140.
Which microcontrollers do boards using the SSI2140 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the SSI2140?
The median is 121 × 128.5 mm, and 63% are two-layer designs.
What is the most popular open source board using the SSI2140?
By GitHub stars, Zoxnoxious Pole Dancer Mixing Filter by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the SSI2140 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.