5 open source boards using the STC3115AIQT
Real designs built with the STC3115AIQT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Pocket 2.66 E-reader
quintenluyten2
45 × 29.2 mm70 parts4LNo license3ESP32
Q2-v2
0x616c6f6e
46 × 76 mm192 parts6LNo license0AVR/Arduino
Selfaware wearable device
aqesters
42 × 15 mm43 parts2LMIT0ESP32
Q2-v2-placement
0x616c6f6e
46 × 76 mm126 parts6LNo license0ESP32
Base
0x616c6f6e
46 × 76 mm119 parts6LNo license0
The STC3115AIQT in open source designs
The gallery holds 5 open source boards using the STC3115AIQT from 3 GitHub repositories; a typical one measures about 46 × 76 mm and carries around 119 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is Pocket 2.66 E-reader PCB by quintenluyten2.
Microcontrollers on boards using the STC3115AIQT
What boards using the STC3115AIQT are built for
STC3115AIQT: common questions
Where can I find a STC3115AIQT reference design?
Each of the 5 boards on this page is a real design using the STC3115AIQT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STC3115AIQT use?
Most are built on ESP32 (4) and AVR/Arduino (1).
How big is a typical board using the STC3115AIQT?
The median is 46 × 76 mm, and 20% are two-layer designs.
What is the most popular open source board using the STC3115AIQT?
By GitHub stars, Pocket 2.66 E-reader PCB by quintenluyten2, with 3 stars.
Can I simulate one of these boards using the STC3115AIQT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.