4 open source boards using the STCC4
Real designs built with the STCC4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Lattepanda MOKA
piecol
100 × 70.1 mm207 parts4LCERN-OHL-S-2.035
ESP32Adapter board r2
picafe
68.4 × 33.4 mm51 parts4LNo license0
Silicon LabsBLE environmental sensor
atuleu
54.5 × 28 mm24 parts2LCERN-OHL-S-2.00
Hive environmental sensor
30 × 17 mm9 parts2LCERN-OHL-S-2.00
The STCC4 in open source designs
The gallery holds 4 open source boards using the STCC4 from 3 GitHub repositories; a typical one measures about 61.5 × 30.7 mm and carries around 38 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Lattepanda MOKA by piecol.
Parts used alongside the STCC4
Microcontrollers on boards using the STCC4
What boards using the STCC4 are built for
STCC4: common questions
Where can I find a STCC4 reference design?
Each of the 4 boards on this page is a real design using the STCC4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STCC4 use?
Most are built on ESP32 (1) and Silicon Labs (1).
How big is a typical board using the STCC4?
The median is 61.5 × 30.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the STCC4?
By GitHub stars, Lattepanda MOKA by piecol, with 35 stars.
Can I simulate one of these boards using the STCC4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.