5 open source boards using the STM32F301K8U6

Real designs built with the STM32F301K8U6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The STM32F301K8U6 in open source designs

The gallery holds 5 open source boards using the STM32F301K8U6 from 2 GitHub repositories; a typical one measures about 32 × 50 mm and carries around 59 components.

60% use four copper layers or more, and 100% carry an open source license.

The most starred is MiniSpeedCam r1.3 by Valar-Systems.

Parts used alongside the STM32F301K8U6

Microcontrollers on boards using the STM32F301K8U6

What boards using the STM32F301K8U6 are built for

STM32F301K8U6: common questions

Where can I find a STM32F301K8U6 reference design?

Each of the 5 boards on this page is a real design using the STM32F301K8U6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the STM32F301K8U6?

The LMP7731MF/NOPB, MAX9814ETD+T, NCP163ASN330T1G and PCA8561AHN/AY appear in the most repositories here.

Which microcontrollers do boards using the STM32F301K8U6 use?

Most are built on ESP32 (3) and STM32 (2).

How big is a typical board using the STM32F301K8U6?

The median is 32 × 50 mm, and 40% are two-layer designs.

What is the most popular open source board using the STM32F301K8U6?

By GitHub stars, MiniSpeedCam r1.3 by Valar-Systems, with 112 stars.

Can I simulate one of these boards using the STM32F301K8U6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.