4 open source boards using the STM32F301K8UX
Real designs built with the STM32F301K8UX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Osc dev v006
OpenServoCore
50 × 40 mm82 parts6LApache-2.034ESP32
MiniSpeedCam-1.2
Valar-Systems
50 × 50 mm100 parts4LCERN-OHL-S-2.0112ESP32
MiniSpeedCam r1.3
Valar-Systems
50 × 50 mm83 parts4LCERN-OHL-S-2.0112STM32
Servo dev board
OpenServoCore
51.5 × 26.5 mm35 parts4LApache-2.034
The STM32F301K8UX in open source designs
The gallery holds 4 open source boards using the STM32F301K8UX from 2 GitHub repositories; a typical one measures about 50 × 45 mm and carries around 83 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is MiniSpeedCam-1.2 by Valar-Systems.
What boards using the STM32F301K8UX are built for
STM32F301K8UX: common questions
Where can I find a STM32F301K8UX reference design?
Each of the 4 boards on this page is a real design using the STM32F301K8UX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F301K8UX use?
Most are built on ESP32 (2) and STM32 (2).
How big is a typical board using the STM32F301K8UX?
The median is 50 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32F301K8UX?
By GitHub stars, MiniSpeedCam-1.2 by Valar-Systems, with 112 stars.
Can I simulate one of these boards using the STM32F301K8UX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.