3 open source boards using the STM32G071CBT6
Real designs built with the STM32G071CBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Dshot esc-100a
Lucas-Poulos
80 × 68 mm160 parts4LNo license0STM32
APS Motherboard
TheStelmach
40 × 59.2 mm76 parts4LGPL-3.00STM32
STM32G071CBT6-ILI9341
TechnikWeber
57 × 91.5 mm24 parts2LMIT0
The STM32G071CBT6 in open source designs
The gallery holds 3 open source boards using the STM32G071CBT6 from 3 GitHub repositories; a typical one measures about 57 × 68 mm and carries around 76 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Dshot esc-100a by Lucas-Poulos.
Microcontrollers on boards using the STM32G071CBT6
What boards using the STM32G071CBT6 are built for
STM32G071CBT6: common questions
Where can I find a STM32G071CBT6 reference design?
Each of the 3 boards on this page is a real design using the STM32G071CBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32G071CBT6 use?
Most are built on STM32 (3).
How big is a typical board using the STM32G071CBT6?
The median is 57 × 68 mm, and 33% are two-layer designs.
What is the most popular open source board using the STM32G071CBT6?
By GitHub stars, Dshot esc-100a by Lucas-Poulos, with 0 stars.
Can I simulate one of these boards using the STM32G071CBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.