3 open source boards using the STM32H563VIT6
Real designs built with the STM32H563VIT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
UCB board
bartkepl
56.8 × 100 mm148 parts4LMIT0STM32
UYDUTEPE
emirhanuluakan
85 × 56 mm93 parts6LCERN-OHL-W-2.00- schematic only · 39 partsSTM32
Granite controller
LeeSmet
39 partsNo license0
The STM32H563VIT6 in open source designs
The gallery holds 3 open source boards using the STM32H563VIT6 from 3 GitHub repositories; a typical one measures about 70.9 × 78 mm and carries around 93 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is UCB board by bartkepl.
Parts used alongside the STM32H563VIT6
Microcontrollers on boards using the STM32H563VIT6
What boards using the STM32H563VIT6 are built for
STM32H563VIT6: common questions
Where can I find a STM32H563VIT6 reference design?
Each of the 3 boards on this page is a real design using the STM32H563VIT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32H563VIT6 use?
Most are built on STM32 (3).
How big is a typical board using the STM32H563VIT6?
The median is 70.9 × 78 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32H563VIT6?
By GitHub stars, UCB board by bartkepl, with 0 stars.
Can I simulate one of these boards using the STM32H563VIT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.