4 open source boards using the STM32H753ZIT6
Real designs built with the STM32H753ZIT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Nexrig
alanmimms
300 × 200 mm642 parts6LNo license2STM32
IRIS
codinga593
80 × 80 mm129 parts6LNo license1- schematic only · 55 partsSTM32
CADFiles
hashaam1217
55 partsNo license0 STM32
Front panel controller
birdybro
150 × 90 mm103 parts6LGPL-3.00
The STM32H753ZIT6 in open source designs
The gallery holds 4 open source boards using the STM32H753ZIT6 from 4 GitHub repositories; a typical one measures about 150 × 90 mm and carries around 116 components.
100% use four copper layers or more, and 25% carry an open source license.
The most starred is Nexrig by alanmimms.
Parts used alongside the STM32H753ZIT6
Microcontrollers on boards using the STM32H753ZIT6
What boards using the STM32H753ZIT6 are built for
STM32H753ZIT6: common questions
Where can I find a STM32H753ZIT6 reference design?
Each of the 4 boards on this page is a real design using the STM32H753ZIT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32H753ZIT6 use?
Most are built on STM32 (4).
How big is a typical board using the STM32H753ZIT6?
The median is 150 × 90 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32H753ZIT6?
By GitHub stars, Nexrig by alanmimms, with 2 stars.
Can I simulate one of these boards using the STM32H753ZIT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.