2 open source boards using the STM32L496RGT3

Real designs built with the STM32L496RGT3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The STM32L496RGT3 in open source designs

The gallery holds 2 open source boards using the STM32L496RGT3 from 2 GitHub repositories; a typical one measures about 47.9 × 33.9 mm and carries around 32 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Ta expt by CMUAbstract.

Parts used alongside the STM32L496RGT3

Microcontrollers on boards using the STM32L496RGT3

What boards using the STM32L496RGT3 are built for

STM32L496RGT3: common questions

Where can I find a STM32L496RGT3 reference design?

Each of the 2 boards on this page is a real design using the STM32L496RGT3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the STM32L496RGT3 use?

Most are built on STM32 (2).

How big is a typical board using the STM32L496RGT3?

The median is 47.9 × 33.9 mm, and 50% are two-layer designs.

What is the most popular open source board using the STM32L496RGT3?

By GitHub stars, Ta expt by CMUAbstract, with 5 stars.

Can I simulate one of these boards using the STM32L496RGT3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part