4 open source boards using the SX1255IWLTRT
Real designs built with the SX1255IWLTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LinHT
M17-Project
45.5 × 96 mm202 parts6LCC-BY-NC-4.0218Netcore tetra
JanHG98
65 × 56.3 mm75 parts2LNo license0Rru2-rf sx1255
M17-Project
22 × 30 mm34 parts4LCC-BY-NC-4.00Sx1255-breakout
MTalon63
31 × 30 mm17 parts6LCustom license2
The SX1255IWLTRT in open source designs
The gallery holds 4 open source boards using the SX1255IWLTRT from 4 GitHub repositories; a typical one measures about 38.2 × 43.1 mm and carries around 55 components.
75% use four copper layers or more, and 0% carry an open source license.
The most starred is LinHT by M17-Project.
Microcontrollers on boards using the SX1255IWLTRT
What boards using the SX1255IWLTRT are built for
SX1255IWLTRT: common questions
Where can I find a SX1255IWLTRT reference design?
Each of the 4 boards on this page is a real design using the SX1255IWLTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SX1255IWLTRT use?
Most are built on AVR/Arduino (1).
How big is a typical board using the SX1255IWLTRT?
The median is 38.2 × 43.1 mm, and 25% are two-layer designs.
What is the most popular open source board using the SX1255IWLTRT?
By GitHub stars, LinHT by M17-Project, with 218 stars.
Can I simulate one of these boards using the SX1255IWLTRT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.