3 open source boards using the TC358870XBG_NOK_
Real designs built with the TC358870XBG_NOK_, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
HDMI-TO-MIPI-MAIN
R-Mutura
77.1 × 49.6 mm126 parts4LNo license1ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00STM32
HDMI-T0-MIPI-2
R-Mutura
90 × 55 mm114 parts4LNo license0
The TC358870XBG_NOK_ in open source designs
The gallery holds 3 open source boards using the TC358870XBG_NOK_ from 3 GitHub repositories; a typical one measures about 90 × 55 mm and carries around 126 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is HDMI-TO-MIPI-MAIN by R-Mutura.
Parts used alongside the TC358870XBG_NOK_
TC358870XBG_NOK_: common questions
Where can I find a TC358870XBG_NOK_ reference design?
Each of the 3 boards on this page is a real design using the TC358870XBG_NOK_. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TC358870XBG_NOK_?
The FXMA2104UMX, MCP1700-1202E_SOT23, MCP1700-3302E_SOT23 and STM32F103C8Tx appear in the most repositories here.
Which microcontrollers do boards using the TC358870XBG_NOK_ use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the TC358870XBG_NOK_?
The median is 90 × 55 mm, and 33% are two-layer designs.
What is the most popular open source board using the TC358870XBG_NOK_?
By GitHub stars, HDMI-TO-MIPI-MAIN by R-Mutura, with 1 stars.
Can I simulate one of these boards using the TC358870XBG_NOK_ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.