8 open source boards using the TCA9517ADGK

Real designs built with the TCA9517ADGK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the TCA9517ADGK

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TCA9517ADGK connects to, and the resistors, capacitors and other passives placed on it.

  • The SDAB_6 pin has a pull-up to 3.3V on 6 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SCLB_7 pin has a pull-up to 3.3V on 6 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
  • The VCCA_1 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 µF).
  • The SCLA_2 pin has a pull-up to 1.8V on 3 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
VCCA_1pin 1Connected to: 3.3V 86%
  • Decoupling capacitor on 71% · 100 nF (7), 10 µF (1)
SCLA_2pin 2Connected to: A connector 29%
  • Pull-up to 1.8V on 43% · 4.7 kΩ (1), 10 kΩ (1)
SDAA_3pin 3Connected to: A connector 29%
  • Pull-up to 1.8V on 43% · 4.7 kΩ (1), 10 kΩ (1)
GND_4pin 4Connected to: GND 100%
SDAB_6pin 6Connected to: A connector 29%, the microcontroller 29%
  • Pull-up to 3.3V on 86% · 4.7 kΩ (2), 10 kΩ (2), 3.3 kΩ (1)
SCLB_7pin 7Connected to: A connector 29%, the microcontroller 29%
  • Pull-up to 3.3V on 86% · 4.7 kΩ (2), 10 kΩ (2), 3.3 kΩ (1)
VCCB_8pin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 43% · 100 nF (3)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hw openmower sabo by xtech, MHCI-DMX by About-Time-Technologies, CompactPi by loganrf and 9-axis-IMU-barometer-Data logger- by Dhruv2212-star.

The TCA9517ADGK in open source designs

The gallery holds 8 open source boards using the TCA9517ADGK from 7 GitHub repositories; a typical one measures about 82.2 × 95 mm and carries around 122 components.

63% use four copper layers or more, and 50% carry an open source license.

The most starred is Hw openmower sabo by xtech.

Microcontrollers on boards using the TCA9517ADGK

TCA9517ADGK: common questions

Where can I find a TCA9517ADGK reference design?

Each of the 8 boards on this page is a real design using the TCA9517ADGK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the TCA9517ADGK SDAB_6 pin?

The SDAB_6 pin has a pull-up to 3.3V on 6 of 7 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the TCA9517ADGK.

What pull-up resistor is used on the TCA9517ADGK SCLB_7 pin?

The SCLB_7 pin has a pull-up to 3.3V on 6 of 7 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the TCA9517ADGK.

What decoupling capacitors do designs use on the TCA9517ADGK VCCA_1 pin?

The VCCA_1 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TCA9517ADGK.

Which microcontrollers do boards using the TCA9517ADGK use?

Most are built on Raspberry Pi (2), ESP32 (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the TCA9517ADGK?

The median is 82.2 × 95 mm, and 38% are two-layer designs.

What is the most popular open source board using the TCA9517ADGK?

By GitHub stars, Hw openmower sabo by xtech, with 5 stars.

Can I simulate one of these boards using the TCA9517ADGK before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part