5 open source boards using the teensy_3-2
Real designs built with the teensy_3-2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPBbesc
jakeread
81.4 × 63.5 mm75 parts2LNo license16
NXPSimple VFO
m0khz
99.1 × 59.7 mm17 parts2LNo license4
NXPBbesc
110.5 × 82.6 mm79 parts2LNo license1
NXPBbesc kiCad 1stAttempt
59 parts2LNo license16
NXPBbesc kiCad 1stAttempt
59 parts2LNo license1
The teensy_3-2 in open source designs
The gallery holds 5 open source boards using the teensy_3-2 from 3 GitHub repositories; a typical one measures about 99.1 × 63.5 mm and carries around 59 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Bbesc kiCad by jakeread.
Microcontrollers on boards using the teensy_3-2
What boards using the teensy_3-2 are built for
teensy_3-2: common questions
Where can I find a teensy_3-2 reference design?
Each of the 5 boards on this page is a real design using the teensy_3-2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the teensy_3-2?
The IR2101, LM358N and LM7805 appear in the most repositories here.
Which microcontrollers do boards using the teensy_3-2 use?
Most are built on NXP (5).
How big is a typical board using the teensy_3-2?
The median is 99.1 × 63.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the teensy_3-2?
By GitHub stars, Bbesc kiCad by jakeread, with 16 stars.
Can I simulate one of these boards using the teensy_3-2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.