4 open source boards using the TJA1042T3118
Real designs built with the TJA1042T3118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
V1
Churrosoft
265.5 × 132.3 mm267 parts2LMIT1STM32
UEFI
Churrosoft
99 × 113 mm228 parts4LCERN-OHL-S-2.08RP2040/RP2350
Dashdashv2
Churrosoft
85.4 × 50.1 mm89 parts4LMIT1STM32
ΜEFI rev2
Churrosoft
99.9 × 99.3 mm151 parts4LCERN-OHL-S-2.08
The TJA1042T3118 in open source designs
The gallery holds 4 open source boards using the TJA1042T3118 from 2 GitHub repositories; a typical one measures about 99.5 × 106.1 mm and carries around 190 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is UEFI by Churrosoft.
Parts used alongside the TJA1042T3118
Microcontrollers on boards using the TJA1042T3118
What boards using the TJA1042T3118 are built for
TJA1042T3118: common questions
Where can I find a TJA1042T3118 reference design?
Each of the 4 boards on this page is a real design using the TJA1042T3118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TJA1042T3118?
The 25LCxxx, LT4363IMS, MIC2940A-3.3WU and MIC2940A-5.0WT appear in the most repositories here.
Which microcontrollers do boards using the TJA1042T3118 use?
Most are built on STM32 (3) and RP2040/RP2350 (1).
How big is a typical board using the TJA1042T3118?
The median is 99.5 × 106.1 mm, and 25% are two-layer designs.
What is the most popular open source board using the TJA1042T3118?
By GitHub stars, UEFI by Churrosoft, with 8 stars.
Can I simulate one of these boards using the TJA1042T3118 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.