6 open source boards using the LT4363IMS

Real designs built with the LT4363IMS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The LT4363IMS in open source designs

The gallery holds 6 open source boards using the LT4363IMS from 2 GitHub repositories; a typical one measures about 161.8 × 115.5 mm and carries around 243 components.

83% use four copper layers or more, and 100% carry an open source license.

The most starred is OpenEFI rev4 bkp by Churrosoft.

Microcontrollers on boards using the LT4363IMS

What boards using the LT4363IMS are built for

LT4363IMS: common questions

Where can I find a LT4363IMS reference design?

Each of the 6 boards on this page is a real design using the LT4363IMS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LT4363IMS?

The 25LCxxx, ADUM4160, MIC2940A-3.3WU, MIC2940A-5.0WT and TJA1042T3118 appear in the most repositories here.

Which microcontrollers do boards using the LT4363IMS use?

Most are built on STM32 (6).

How big is a typical board using the LT4363IMS?

The median is 161.8 × 115.5 mm, and 17% are two-layer designs.

What is the most popular open source board using the LT4363IMS?

By GitHub stars, OpenEFI rev4 bkp by Churrosoft, with 8 stars.

Can I simulate one of these boards using the LT4363IMS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part