2 open source boards using the TL1963A-33DCYR

Real designs built with the TL1963A-33DCYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TL1963A-33DCYR in open source designs

The gallery holds 2 open source boards using the TL1963A-33DCYR from 2 GitHub repositories; a typical one measures about 122.8 × 95.9 mm and carries around 139 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is MachXO2-KiCad-Board by jay-waghmare.

Microcontrollers on boards using the TL1963A-33DCYR

TL1963A-33DCYR: common questions

Where can I find a TL1963A-33DCYR reference design?

Each of the 2 boards on this page is a real design using the TL1963A-33DCYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TL1963A-33DCYR use?

Most are built on FPGA (1) and Raspberry Pi (1).

How big is a typical board using the TL1963A-33DCYR?

The median is 122.8 × 95.9 mm, and 50% are two-layer designs.

What is the most popular open source board using the TL1963A-33DCYR?

By GitHub stars, MachXO2-KiCad-Board by jay-waghmare, with 1 stars.

Can I simulate one of these boards using the TL1963A-33DCYR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part