6 open source boards using the TLV1117LV33DCY

Real designs built with the TLV1117LV33DCY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TLV1117LV33DCY

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLV1117LV33DCY connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 22 µF).
  • Pin 1 is tied to GND on 6 of 6 designs.
  • Pin 2 has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF).
  • Pin 2 is tied to 3.3V on 4 of 6 designs (a signal on 2).
Pin 1Connected to: GND 100%
Pin 2Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 83% · 100 nF (5), 10 nF (3), 22 µF (2)
  • Inductor on 33%
Pin 3Connected to: VCC 50% · a signal 50%
  • Decoupling capacitor on 100% · 100 nF (7), 22 µF (6), 10 nF (4)
  • Inductor on 50%
  • Capacitor on 33% · 100 pF (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DSP-ADAU1452 by ohdsp, UDSP by ohdsp, DAC-ADAU1966 by ohdsp and ADC-PCM4202 by ohdsp.

The TLV1117LV33DCY in open source designs

The gallery holds 6 open source boards using the TLV1117LV33DCY from 6 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 234 components.

67% use four copper layers or more, and 100% carry an open source license.

The most starred is DSP-ADAU1452 by ohdsp.

What boards using the TLV1117LV33DCY are built for

TLV1117LV33DCY: common questions

Where can I find a TLV1117LV33DCY reference design?

Each of the 6 boards on this page is a real design using the TLV1117LV33DCY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TLV1117LV33DCY pin 3?

Pin 3 has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the TLV1117LV33DCY.

How is the TLV1117LV33DCY pin 1 connected?

Pin 1 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TLV1117LV33DCY.

What decoupling capacitors do designs use on the TLV1117LV33DCY pin 2?

Pin 2 has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the TLV1117LV33DCY.

What parts are used alongside the TLV1117LV33DCY?

The TPS7A4501, ADAU1452WBCPZ, ADM811TART, NB3L553 and PCM4202DBT appear in the most repositories here.

How big is a typical board using the TLV1117LV33DCY?

The median is 100 × 100 mm, and 33% are two-layer designs.

What is the most popular open source board using the TLV1117LV33DCY?

By GitHub stars, DSP-ADAU1452 by ohdsp, with 68 stars.

Can I simulate one of these boards using the TLV1117LV33DCY before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part