13 open source boards using the ADAU1452WBCPZ

Real designs built with the ADAU1452WBCPZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the ADAU1452WBCPZ

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ADAU1452WBCPZ connects to, and the resistors, capacitors and other passives placed on it.

  • The IOVDD pins have a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF).
  • The PVDD pin has a series capacitor on 8 of 8 designs, most often 150 pF (then 5.6 nF).
  • The PVDD pin has a capacitor to GND on 8 of 8 designs, most often 100 nF (then 22 µF).
  • The PLLFILT pin has a series resistor on 8 of 8 designs, most often 4.3 kΩ.
DGNDpin 1, 17, 19, 25, 36, 37, 54, 55, 72Connected to: GND 99%
IOVDDpin 2, 18, 38, 56Connected to: 3.3V 73% · a signal 27%
  • Decoupling capacitor on 89% · 100 nF (40), 1 µF (23), 10 µF (6)
VDRIVEpin 3Connected to: Signal 100%
  • Pull-up to 3.3V on 78% · 1 kΩ (3)
SPDIFINpin 4Connected to: Signal 67% · not connected 22%
  • Series resistor on 33% · 22 Ω (2)
SPDIFOUTpin 5Connected to: Signal 89%
  • Series resistor on 56% · 75 Ω (1), 22 Ω (1), 0 Ω (1)
AGNDpin 6Connected to: GND 89%
AVDDpin 7Connected to: AVDD 56% · a signal 44%
  • Decoupling capacitor on 78% · 100 nF (8), 22 µF (1)
AUXADC0pin 8Connected to: Not connected 56% · a signal 33%
  • Series resistor on 33% · 4.7 kΩ (3)
AUXADC1pin 9Connected to: Not connected 63% · a signal 38%
  • Series resistor on 38% · 4.7 kΩ (3)
AUXADC2pin 10Connected to: Not connected 50% · a signal 50%
  • Series resistor on 38% · 4.7 kΩ (3)
AUXADC3pin 11Connected to: Not connected 50% · a signal 50%
  • Series resistor on 38% · 4.7 kΩ (3)
AUXADC4pin 12Connected to: Not connected 50% · a signal 50%
  • Series resistor on 38% · 4.7 kΩ (3)
AUXADC5pin 13Connected to: Signal 63% · not connected 38%
  • Series resistor on 38% · 4.7 kΩ (3)
PGNDpin 14Connected to: GND 100%
PVDDpin 15Connected to: Signal 75% · 3.3V 25%
  • Series capacitor on 100% · 150 pF (5), 5.6 nF (4)
  • Capacitor to GND on 100% · 100 nF (9), 22 µF (2), 10 µF (2)
PLLFILTpin 16Connected to: Signal 100%
  • Series resistor on 100% · 4.3 kΩ (5)
  • Series capacitor on 75% · 150 pF (3)
DVDDpin 20, 35, 53, 71Connected to: Signal 63% · DVDD 38%
  • Capacitor to GND on 100% · 100 nF (43), 10 nF (11), 10 µF (9)
XTALIN/MCLKpin 21Connected to: Signal 100%
  • Crystal on 75% · 12.288 MHz (1)
  • Capacitor to GND on 75% · 33 pF (3), 10 pF (1)
  • Series resistor on 63% · 100 Ω (1)
XTALOUTpin 22Connected to: Signal 88%
  • Series resistor on 75% · 100 Ω (4)
CLKOUTpin 23Connected to: Signal 88%
  • Series resistor on 75% · 75 Ω (3), 22 Ω (1), 33 Ω (1)
RESETpin 24Connected to: ADM811TARTZ-REEL 38%, NC7WZ07P6X 25%, a connector 25%
  • Pull-up to VDD on 50% · 10 kΩ (1)
  • Capacitor to GND on 50% · 100 nF (4)
  • Series resistor on 50% · 100 Ω (4)
  • Resistor to GND on 38%
SS_M/MP0pin 26Connected to: 25AA1024T-I/SM 38% · not connected 25%
  • Pull-up to 3.3V on 38%
  • Series resistor on 38% · 75 Ω (1), 22 Ω (1), 0 Ω (1)
MOSI_M/MP1pin 27Connected to: 25AA1024T-I/SM 38% · not connected 25%
  • Series resistor on 38% · 75 Ω (1), 22 Ω (1), 0 Ω (1)
SCL_M/SCLK_M/MP2pin 28Connected to: 25AA1024T-I/SM 38%
  • Series resistor on 50% · 0 Ω (2), 75 Ω (1), 22 Ω (1)
SDA_M/MISO_M/MP3pin 29Connected to: 25AA1024T-I/SM 38%
  • Series resistor on 50% · 0 Ω (4), 75 Ω (1), 22 Ω (1)
MISO/SDApin 30Connected to: The microcontroller 25%, a connector 25%
  • Series resistor on 75% · 0 Ω (3), 75 Ω (1), 22 Ω (1)
  • Pull-up to 3.3V on 50% · 4.7 kΩ (1)
  • Crystal on 38%
SCLK/SCLpin 31Connected to: The microcontroller 25%, a connector 25%
  • Series resistor on 75% · 0 Ω (5), 1 kΩ (1)
  • Pull-up to 3.3V on 50% · 4.7 kΩ (1)
  • Crystal on 38%
MOSI/ADDR1pin 32Connected to: Signal 63% · GND 38%
  • Resistor to GND on 38% · 10 kΩ (1)
  • Series resistor on 38% · 0 Ω (2)
SS/ADDR0pin 33Connected to: Signal 63% · GND 38%
  • Series resistor on 38% · 0 Ω (2)
  • Resistor to GND on 38% · 10 kΩ (1)
SELFBOOTpin 34Connected to: A connector 25%
  • Pull-up to 3.3V on 63% · 1 kΩ (1), 10 kΩ (1)
LRCLK_OUT0/MP4pin 39Connected to: Signal 100%
  • Series resistor on 88% · 33 Ω (3), 75 Ω (1), 22 Ω (1)
BCLK_OUT0pin 40Connected to: Signal 100%
  • Series resistor on 88% · 33 Ω (3), 75 Ω (1), 22 Ω (1)
SDATA_OUT0pin 41Connected to: Signal 100%
  • Series resistor on 88% · 33 Ω (3), 75 Ω (1), 22 Ω (1)
LRCLK_OUT1/MP5pin 42Connected to: Signal 88%
  • Series resistor on 88% · 33 Ω (3), 75 Ω (1), 22 Ω (1)
BCLK_OUT1pin 43Connected to: Signal 88%
  • Series resistor on 88% · 33 Ω (3), 75 Ω (1), 22 Ω (1)
SDATA_OUT1pin 44Connected to: Signal 88%
  • Series resistor on 88% · 33 Ω (3), 75 Ω (1), 22 Ω (1)
MP6pin 45Connected to: Not connected 75% · a signal 25%
MP7pin 46Connected to: Not connected 75% · a signal 25%
LRCLK_OUT2/MP8pin 47Connected to: Signal 75% · not connected 25%
  • Series resistor on 75% · 33 Ω (2), 75 Ω (1), 22 Ω (1)
BCLK_OUT2pin 48Connected to: Not connected 50% · a signal 50%
  • Series resistor on 50% · 75 Ω (1), 22 Ω (1), 27 Ω (1)

20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, DSP-ADAU1452 by ohdsp, FreeDSP-INFINITAS by freeDSP and UDSP by ohdsp.

The ADAU1452WBCPZ in open source designs

The gallery holds 13 open source boards using the ADAU1452WBCPZ from 9 GitHub repositories; a typical one measures about 113 × 77 mm and carries around 171 components.

69% are two-layer designs, the rest use four layers or more, and 77% carry an open source license.

The most starred is FreeDSP-aurora by freeDSP.

Microcontrollers on boards using the ADAU1452WBCPZ

What boards using the ADAU1452WBCPZ are built for

ADAU1452WBCPZ: common questions

Where can I find a ADAU1452WBCPZ reference design?

Each of the 13 boards on this page is a real design using the ADAU1452WBCPZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADAU1452WBCPZ IOVDD pin?

The IOVDD pins have a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the ADAU1452WBCPZ.

How is the ADAU1452WBCPZ PVDD pin connected?

The PVDD pin has a series capacitor on 8 of 8 designs, most often 150 pF (then 5.6 nF). Counted from the KiCad layouts of 9 open source designs using the ADAU1452WBCPZ.

What resistor goes on the ADAU1452WBCPZ PLLFILT pin?

The PLLFILT pin has a series resistor on 8 of 8 designs, most often 4.3 kΩ. Counted from the KiCad layouts of 9 open source designs using the ADAU1452WBCPZ.

What parts are used alongside the ADAU1452WBCPZ?

The 25AA1024T-I/SM, ADM811TARTZ-REEL, LM1117MP-5.0/NOPB, NC7WZ07P6X and CS2100CP-CZZ appear in the most repositories here.

Which microcontrollers do boards using the ADAU1452WBCPZ use?

Most are built on ESP32 (3).

How big is a typical board using the ADAU1452WBCPZ?

The median is 113 × 77 mm, and 69% are two-layer designs.

What is the most popular open source board using the ADAU1452WBCPZ?

By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.

Can I simulate one of these boards using the ADAU1452WBCPZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part