7 open source boards using the TLV320AIC3204IRHBR
Real designs built with the TLV320AIC3204IRHBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Home mini v1-drop in
iMike78
72.4 × 70 mm223 parts4LCERN-OHL-S-2.0408STM32
Aarebot - Eurorack DSP Module
95lux
46 × 110 mm141 parts4LGPL-3.015RP2040/RP2350
Digirig icom
1vers1on
48.5 × 56 mm60 parts4LNo license1STM32
Voicevault standalone b0
adlererik
70 × 45 mm296 parts6LNo license0STM32
Ir remote
danngreen
127 × 53.5 mm99 parts2LNo license0Mohawk
sparques
65 × 30 mm50 parts2LGPL-2.00STM32
Voicevault standalone c0
adlererik
70 × 45 mm195 parts6LNo license0
How designs wire the TLV320AIC3204IRHBR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLV320AIC3204IRHBR connects to, and the resistors, capacitors and other passives placed on it.
- The REF pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF).
- The AVDD pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF).
- The DVDD pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF).
- The IOVDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MCLKpin 1 | Connected to: The microcontroller 50% |
|
| BCLKpin 2 | Connected to: The microcontroller 50% |
|
| WCLKpin 3 | Connected to: The microcontroller 50% |
|
| DIN_/_MFP1pin 4 | Connected to: The microcontroller 50% |
|
| DOUT_/_MFP2pin 5 | Connected to: The microcontroller 50% · not connected 17% |
|
| IOVDDpin 6 | Connected to: 3.3V 100% |
|
| IOVSSpin 7 | Connected to: GND 100% | — |
| SCL/SSpin 9 | Connected to: The microcontroller 67% |
|
| SDA/MOSIpin 10 | Connected to: The microcontroller 67% |
|
| MISO_/_MFP4pin 11 | Connected to: Not connected 67% · a signal 33% | — |
| SPI__SELECTpin 12 | Connected to: GND 50% · a signal 50% |
|
| IN1_Lpin 13 | Connected to: Signal 100% |
|
| IN1_Rpin 14 | Connected to: Signal 67% · not connected 33% |
|
| IN2_Lpin 15 | Connected to: Not connected 50% · a signal 50% |
|
| IN2_Rpin 16 | Connected to: Not connected 50% · a signal 50% |
|
| AVSSpin 17 | Connected to: GND 100% | — |
| REFpin 18 | Connected to: Signal 100% |
|
| MICBIASpin 19 | Connected to: Not connected 67% · a signal 33% | — |
| IN3_Lpin 20 | Connected to: Not connected 50% · a signal 50% |
|
| IN3_Rpin 21 | Connected to: Not connected 50% · a signal 50% |
|
| LOLpin 22 | Connected to: Signal 83% · not connected 17% |
|
| LORpin 23 | Connected to: Not connected 50% · a signal 50% |
|
| AVDDpin 24 | Connected to: Signal 83% · AVDD 17% |
|
| HPLpin 25 | Connected to: Not connected 67% · a signal 33% |
|
| LDOINpin 26 | Connected to: 3.3V 67% · a signal 33% | — |
| HPRpin 27 | Connected to: Not connected 50% · a signal 50% |
|
| DVSSpin 28 | Connected to: GND 100% | — |
| DVDDpin 29 | Connected to: Signal 100% |
|
| LDO__SELECTpin 30 | Connected to: 3.3V 50% · a signal 50% |
|
| RESETpin 31 | Connected to: The microcontroller 50% · 3.3V 17% |
|
| EPpin 33 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Home mini v1-drop in pcb by iMike78, Aarebot - Eurorack DSP Module by 95lux, Digirig icom by 1vers1on and Voicevault standalone b0 by adlererik.
The TLV320AIC3204IRHBR in open source designs
The gallery holds 7 open source boards using the TLV320AIC3204IRHBR from 6 GitHub repositories; a typical one measures about 70 × 53.5 mm and carries around 141 components.
71% use four copper layers or more, and 43% carry an open source license.
The most starred is Home mini v1-drop in pcb by iMike78.
Microcontrollers on boards using the TLV320AIC3204IRHBR
What boards using the TLV320AIC3204IRHBR are built for
TLV320AIC3204IRHBR: common questions
Where can I find a TLV320AIC3204IRHBR reference design?
Each of the 7 boards on this page is a real design using the TLV320AIC3204IRHBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV320AIC3204IRHBR REF pin connected?
The REF pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the TLV320AIC3204IRHBR.
How is the TLV320AIC3204IRHBR AVDD pin connected?
The AVDD pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the TLV320AIC3204IRHBR.
How is the TLV320AIC3204IRHBR DVDD pin connected?
The DVDD pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TLV320AIC3204IRHBR.
Which microcontrollers do boards using the TLV320AIC3204IRHBR use?
Most are built on STM32 (4), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the TLV320AIC3204IRHBR?
The median is 70 × 53.5 mm, and 29% are two-layer designs.
What is the most popular open source board using the TLV320AIC3204IRHBR?
By GitHub stars, Home mini v1-drop in pcb by iMike78, with 408 stars.
Can I simulate one of these boards using the TLV320AIC3204IRHBR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.