3 open source boards using the TLV61220
Real designs built with the TLV61220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MobilECG main
peterisza
30 × 48 mm231 partsNo license66AVR/Arduino
SMOL
heyspacebuck
14.2 × 12.2 mm13 parts2LBSD-3-Clause16STM32
12-lead holter ecg
shriram-m
30 × 48 mm231 partsCC-BY-SA-4.00
The TLV61220 in open source designs
The gallery holds 3 open source boards using the TLV61220 from 3 GitHub repositories; a typical one measures about 30 × 48 mm and carries around 231 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is MobilECG main by peterisza.
Parts used alongside the TLV61220
Microcontrollers on boards using the TLV61220
What boards using the TLV61220 are built for
TLV61220: common questions
Where can I find a TLV61220 reference design?
Each of the 3 boards on this page is a real design using the TLV61220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TLV61220?
The 256kx8, ADS1298, ESD_PROTECTOR, LIS2DH12 and OPA379 appear in the most repositories here.
Which microcontrollers do boards using the TLV61220 use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the TLV61220?
The median is 30 × 48 mm, and 100% are two-layer designs.
What is the most popular open source board using the TLV61220?
By GitHub stars, MobilECG main by peterisza, with 66 stars.
Can I simulate one of these boards using the TLV61220 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.