10 open source boards using the LIS2DH12
Real designs built with the LIS2DH12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Plinkyblack hwmidi jacks
plinkysynth
121.9 × 109.2 mm261 parts4LMIT221STM32
MobilECG main
peterisza
30 × 48 mm231 partsNo license66STM32
Plinkyblack hwmidi jacks
ember-labs-io
121.9 × 109.2 mm261 parts4LCC-BY-SA-4.019RP2040/RP2350
Ostentus hw
golioth
80.7 × 78.7 mm65 parts4LCERN-OHL-P-2.017ThirdpartyHT32SX
htmicron
85 × 54 mm41 parts2LNo license2STM32
Analog noise
BBBSnowball
12.7 × 45.6 mm68 parts4LNo license1STM32
12-lead holter ecg
shriram-m
30 × 48 mm231 partsCC-BY-SA-4.00ESP32
Oomlout oomp documentation bot
oomlout
68.2 × 110.1 mm164 parts4LNo license0ESP32
Lichtstab
kilimnik
100.5 × 87.7 mm139 parts4LNo license0HTMICRON-iMCP-devkit
disk91
85 × 54 mm41 parts2LNo license0
How designs wire the LIS2DH12
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the LIS2DH12 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF).
- The VDD_IO pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF).
- The RES pin is tied to GND on 8 of 10 designs.
- The SCL/SPC pin has a pull-up to 3.3V on 6 of 10 designs, most often 2.2 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/SPCpin 1 | Connected to: A connector 60%, the microcontroller 50%, DAC7554IDGS 20% |
|
| CSpin 2 | Connected to: 3.3V 60% · a signal 40% | — |
| SA0/SDOpin 3 | Connected to: The microcontroller 20% · GND 20% · VCC 30% |
|
| SDA/SDIpin 4 | Connected to: A connector 50%, the microcontroller 40%, DAC7554IDGS 20% |
|
| RESpin 5 | Connected to: GND 80% | — |
| GNDpin 6, 7, 8 | Connected to: GND 90% | — |
| VDDpin 9 | Connected to: 3.3V 70% · a signal 30% |
|
| VDD_IOpin 10 | Connected to: 3.3V 70% · a signal 30% |
|
| INT2pin 11 | Connected to: Not connected 70% · a signal 30% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plinkyblack hwmidi jacks by plinkysynth, MobilECG main by peterisza, Plinkyblack hwmidi jacks by ember-labs-io and Ostentus hw by golioth.
The LIS2DH12 in open source designs
The gallery holds 10 open source boards using the LIS2DH12 from 10 GitHub repositories; a typical one measures about 82.8 × 66.3 mm and carries around 152 components.
75% use four copper layers or more, and 40% carry an open source license.
The most starred is Plinkyblack hwmidi jacks by plinkysynth.
Parts used alongside the LIS2DH12
Microcontrollers on boards using the LIS2DH12
What boards using the LIS2DH12 are built for
LIS2DH12: common questions
Where can I find a LIS2DH12 reference design?
Each of the 10 boards on this page is a real design using the LIS2DH12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LIS2DH12 VDD pin?
The VDD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the LIS2DH12.
What decoupling capacitors do designs use on the LIS2DH12 VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the LIS2DH12.
How is the LIS2DH12 RES pin connected?
The RES pin is tied to GND on 8 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the LIS2DH12.
What parts are used alongside the LIS2DH12?
The 256kx8, ADS1298, ANTENNA_SMPL, BME280 and DAC7554IDGS appear in the most repositories here.
Which microcontrollers do boards using the LIS2DH12 use?
Most are built on STM32 (5), ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the LIS2DH12?
The median is 82.8 × 66.3 mm, and 25% are two-layer designs.
What is the most popular open source board using the LIS2DH12?
By GitHub stars, Plinkyblack hwmidi jacks by plinkysynth, with 221 stars.
Can I simulate one of these boards using the LIS2DH12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.