5 open source boards using the TLV62569DRL
Real designs built with the TLV62569DRL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
PCB For FPGA Path Tracer
Scrarf
50 × 50 mm199 parts8LNo license1ESP32
SPIKE
cr1spyapple
29.3 × 56.5 mm52 parts2LNo license0RP2040/RP2350
Fpga extension
matgla
47.5 × 50 mm120 parts6LMIT10FPGA
Anice
hackclub
65.6 × 34 mm91 parts4LNo license2STM32
Control stage
oresat
40 × 36.5 mm78 parts6LGPL-2.021
How designs wire the TLV62569DRL
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV62569DRL connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF).
- The SW pin has a inductor on 5 of 5 designs, most often 2.2 µH (then 1 µH).
- The EN pin is tied to 5V on 5 of 5 designs.
- The FB pin has a resistor to GND on 4 of 5 designs, most often 100 kΩ (then 120 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FBpin 1 | Connected to: Signal 80% · GND 20% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VINpin 3 | Connected to: 5V 100% |
|
| SWpin 4 | Connected to: Signal 100% |
|
| ENpin 5 | Connected to: 5V 100% | — |
| NCpin 6 | Connected to: Not connected 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Control stage by oresat, Fpga extension by matgla, Anice by hackclub and PCB For FPGA Path Tracer by Scrarf.
The TLV62569DRL in open source designs
The gallery holds 5 open source boards using the TLV62569DRL from 5 GitHub repositories; a typical one measures about 47.5 × 50 mm and carries around 91 components.
80% use four copper layers or more, and 40% carry an open source license.
The most starred is Control stage by oresat.
Parts used alongside the TLV62569DRL
Microcontrollers on boards using the TLV62569DRL
What boards using the TLV62569DRL are built for
TLV62569DRL: common questions
Where can I find a TLV62569DRL reference design?
Each of the 5 boards on this page is a real design using the TLV62569DRL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TLV62569DRL VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the TLV62569DRL.
How is the TLV62569DRL SW pin connected?
The SW pin has a inductor on 5 of 5 designs, most often 2.2 µH (then 1 µH). Counted from the KiCad layouts of 5 open source designs using the TLV62569DRL.
How is the TLV62569DRL EN pin connected?
The EN pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV62569DRL.
Which microcontrollers do boards using the TLV62569DRL use?
Most are built on FPGA (2), ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TLV62569DRL?
The median is 47.5 × 50 mm, and 20% are two-layer designs.
What is the most popular open source board using the TLV62569DRL?
By GitHub stars, Control stage by oresat, with 21 stars.
Can I simulate one of these boards using the TLV62569DRL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.