11 open source boards using the TLV75530PDBVR
Real designs built with the TLV75530PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRFAura a04
Avinash1286
35.2 × 35.2 mm72 parts4LMIT0
Nordic nRFAura a03
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-before ground refinement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-before placement refinement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-before second placement refinement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-native routing
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-working
24 × 42 mm61 parts4LMIT0
Nordic nRFAura placement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a02-routing draft
24 × 34 mm59 parts4LMIT0
Nordic nRFEarly export
24 × 34 mm59 parts4LMIT0
Nordic nRFKrt failed
24 × 34 mm59 parts4LMIT0
The TLV75530PDBVR in open source designs
The gallery holds 11 open source boards using the TLV75530PDBVR from 1 GitHub repository; a typical one measures about 24 × 42 mm and carries around 61 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Aura a04 by Avinash1286.
Microcontrollers on boards using the TLV75530PDBVR
What boards using the TLV75530PDBVR are built for
TLV75530PDBVR: common questions
Where can I find a TLV75530PDBVR reference design?
Each of the 11 boards on this page is a real design using the TLV75530PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV75530PDBVR use?
Most are built on Nordic nRF (11).
How big is a typical board using the TLV75530PDBVR?
The median is 24 × 42 mm, and 0% are two-layer designs.
What is the most popular open source board using the TLV75530PDBVR?
By GitHub stars, Aura a04 by Avinash1286, with 0 stars.
Can I simulate one of these boards using the TLV75530PDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.