3 open source boards using the TLV9351IDCKR
Real designs built with the TLV9351IDCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Hermes Lite2 IO Connector
jimahlstrom
93 × 53.4 mm116 parts4LNo license55RP2040/RP2350
PHOBOS Control
K-Eckert15
34.7 × 49.9 mm74 parts2LNo license1ESP32
CIMPLC-Hardware
jtmaston
153.5 × 73.7 mm124 parts4LCERN-OHL-W-2.00
The TLV9351IDCKR in open source designs
The gallery holds 3 open source boards using the TLV9351IDCKR from 3 GitHub repositories; a typical one measures about 93 × 53.4 mm and carries around 116 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is Hermes Lite2 IO Connector by jimahlstrom.
Microcontrollers on boards using the TLV9351IDCKR
What boards using the TLV9351IDCKR are built for
TLV9351IDCKR: common questions
Where can I find a TLV9351IDCKR reference design?
Each of the 3 boards on this page is a real design using the TLV9351IDCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV9351IDCKR use?
Most are built on RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the TLV9351IDCKR?
The median is 93 × 53.4 mm, and 33% are two-layer designs.
What is the most popular open source board using the TLV9351IDCKR?
By GitHub stars, Hermes Lite2 IO Connector by jimahlstrom, with 55 stars.
Can I simulate one of these boards using the TLV9351IDCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.