7 open source boards using the LMR33630BDDA

Real designs built with the LMR33630BDDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LMR33630BDDA

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LMR33630BDDA connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN_2 pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 220 nF).
  • The PG_4 pin is left unconnected on 6 of 7 designs.
  • The FB_5 pin has a resistor to GND on 5 of 7 designs, most often 24.9 kΩ (then 43.2 kΩ).
  • The VCC_6 pin has a capacitor to GND on 5 of 7 designs, most often 1 µF.
GNDpin 1, 9Connected to: GND 86%
VIN_2pin 2Connected to: 24V 71%
  • Decoupling capacitor on 71% · 10 µF (5), 220 nF (4)
PG_4pin 4Connected to: Not connected 86%
FB_5pin 5Connected to: Signal 71% · not connected 29%
  • Resistor to GND on 71% · 24.9 kΩ (2), 43.2 kΩ (2), 24 kΩ (1)
  • Pull-up to 3.3V on 57% · 100 kΩ (4)
VCC_6pin 6Connected to: Signal 71% · not connected 29%
  • Capacitor to GND on 71% · 1 µF (5)
BOOT_7pin 7Connected to: Signal 71% · not connected 29%
  • Series capacitor on 71% · 100 nF (5)
SW_8pin 8Connected to: Signal 86%
  • Series capacitor on 71% · 100 nF (5)
  • Inductor on 71% · 74.4 GH (1), 4.7 µH (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Obd32 by mkrasselt1, M4 CAN Feather Carrier v6 by 2468shrm, TPA3116D2-Class-D-Amplifier by Loredati-svg and Grippyboi by gabbla.

The LMR33630BDDA in open source designs

The gallery holds 7 open source boards using the LMR33630BDDA from 7 GitHub repositories; a typical one measures about 70.5 × 70.6 mm and carries around 69 components.

57% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Obd32 by mkrasselt1.

Parts used alongside the LMR33630BDDA

Microcontrollers on boards using the LMR33630BDDA

LMR33630BDDA: common questions

Where can I find a LMR33630BDDA reference design?

Each of the 7 boards on this page is a real design using the LMR33630BDDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LMR33630BDDA VIN_2 pin?

The VIN_2 pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 220 nF). Counted from the KiCad layouts of 7 open source designs using the LMR33630BDDA.

How is the LMR33630BDDA PG_4 pin connected?

The PG_4 pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the LMR33630BDDA.

What resistor goes on the LMR33630BDDA FB_5 pin?

The FB_5 pin has a resistor to GND on 5 of 7 designs, most often 24.9 kΩ (then 43.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the LMR33630BDDA.

Which microcontrollers do boards using the LMR33630BDDA use?

Most are built on ESP32 (2) and STM32 (1).

How big is a typical board using the LMR33630BDDA?

The median is 70.5 × 70.6 mm, and 57% are two-layer designs.

What is the most popular open source board using the LMR33630BDDA?

By GitHub stars, Obd32 by mkrasselt1, with 4 stars.

Can I simulate one of these boards using the LMR33630BDDA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part