3 open source boards using the TPD2E009DBZR

Real designs built with the TPD2E009DBZR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TPD2E009DBZR in open source designs

The gallery holds 3 open source boards using the TPD2E009DBZR from 3 GitHub repositories; a typical one measures about 66 × 46 mm and carries around 99 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Artix-7-FPGA-Dev-Board by LZajmi.

Microcontrollers on boards using the TPD2E009DBZR

TPD2E009DBZR: common questions

Where can I find a TPD2E009DBZR reference design?

Each of the 3 boards on this page is a real design using the TPD2E009DBZR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPD2E009DBZR use?

Most are built on ESP32 (1) and FPGA (1).

How big is a typical board using the TPD2E009DBZR?

The median is 66 × 46 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPD2E009DBZR?

By GitHub stars, Artix-7-FPGA-Dev-Board by LZajmi, with 3 stars.

Can I simulate one of these boards using the TPD2E009DBZR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part