5 open source boards using the TPS259531DSGR
Real designs built with the TPS259531DSGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Board
wang-edward
300 × 120 mm228 parts4LMIT5RP2040/RP2350
Skeeball premium re
mikenemat
116.7 × 85.7 mm208 parts4LNo license0RP2040/RP2350
ARC PFC
RTU-HPR
50 × 88.5 mm138 parts4LNo license0STM32
VERTEX
MiksBalodis
86.8 × 48.3 mm124 parts4LNo license0ESP32
Dawn dock
rwrife
135 × 95 mm36 parts2LNo license0
How designs wire the TPS259531DSGR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS259531DSGR connects to, and the resistors, capacitors and other passives placed on it.
- The ILM_7 pin has a resistor to GND on 4 of 5 designs, most often 680 Ω (then 5 kΩ).
- The IN_3 pin is tied to 5V on 4 of 5 designs.
- The IN_4 pin is tied to 5V on 4 of 5 designs.
- The DVDT_1 pin has a capacitor to GND on 3 of 5 designs, most often 3.3 nF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DVDT_1pin 1 | Connected to: Signal 60% · not connected 40% |
|
| EN/UVLO_2pin 2 | Connected to: The microcontroller 40% · VBUS 20% |
|
| IN_3pin 3 | Connected to: 5V 80% · a signal 20% | — |
| IN_4pin 4 | Connected to: 5V 80% · a signal 20% | — |
| OUT_5pin 5 | Connected to: 5V 60% · a signal 40% | — |
| FLT_6pin 6 | Connected to: Signal 60% · not connected 40% |
|
| ILM_7pin 7 | Connected to: Signal 80% · not connected 20% |
|
| GND_8pin 8 | Connected to: GND 100% | — |
| GND_9pin 9 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Board by wang-edward, Skeeball premium re by mikenemat, VERTEX by MiksBalodis and ARC PFC by RTU-HPR.
The TPS259531DSGR in open source designs
The gallery holds 5 open source boards using the TPS259531DSGR from 5 GitHub repositories; a typical one measures about 116.7 × 88.5 mm and carries around 138 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is Board by wang-edward.
Parts used alongside the TPS259531DSGR
Microcontrollers on boards using the TPS259531DSGR
What boards using the TPS259531DSGR are built for
TPS259531DSGR: common questions
Where can I find a TPS259531DSGR reference design?
Each of the 5 boards on this page is a real design using the TPS259531DSGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS259531DSGR ILM_7 pin?
The ILM_7 pin has a resistor to GND on 4 of 5 designs, most often 680 Ω (then 5 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS259531DSGR.
How is the TPS259531DSGR IN_3 pin connected?
The IN_3 pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS259531DSGR.
How is the TPS259531DSGR IN_4 pin connected?
The IN_4 pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS259531DSGR.
What parts are used alongside the TPS259531DSGR?
The BMP388, LSM6DSOTR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the TPS259531DSGR use?
Most are built on RP2040/RP2350 (3), ESP32 (1) and STM32 (1).
How big is a typical board using the TPS259531DSGR?
The median is 116.7 × 88.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the TPS259531DSGR?
By GitHub stars, Board by wang-edward, with 5 stars.
Can I simulate one of these boards using the TPS259531DSGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.