13 open source boards using the TPS561201
Real designs built with the TPS561201, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Adam psu
AkBKukU
78.7 × 60.8 mm43 parts2LNo license11
STM32MoxiE Control board
Teslafly
65 × 56 mm175 parts4LMIT5
STM3265x56 coming together
65 × 56 mm172 parts4LMIT5
STM32Before form factor change
68 × 59 mm172 parts4LMIT5
STM32Before reduce net ties
65 × 56 mm172 parts4LMIT5
STM32Lowside gate vias placed
68 × 58 mm172 parts4LMIT5
STM3260x60 cap edge
68 × 58 mm171 parts4LMIT5
STM32Before blacklist try
68 × 58 mm171 parts4LMIT5
STM32Cap in middle thinner
68 × 58 mm171 parts4LMIT5
STM32Moxie drv powerstage layed out
68 × 58 mm166 parts4LMIT5
STM32Moxie drv straightfet cutout test2 splitcaps
90 × 45 mm153 parts4LMIT5
STM32Moxie drv sidecaps w tightshunts
68 × 58 mm151 parts4LMIT5
STM32Moxie drv rtop tfet
90 × 45 mm148 parts4LMIT5
The TPS561201 in open source designs
The gallery holds 13 open source boards using the TPS561201 from 2 GitHub repositories; a typical one measures about 68 × 58 mm and carries around 171 components.
92% use four copper layers or more, and 92% carry an open source license.
The most starred is Adam psu by AkBKukU.
Microcontrollers on boards using the TPS561201
What boards using the TPS561201 are built for
TPS561201: common questions
Where can I find a TPS561201 reference design?
Each of the 13 boards on this page is a real design using the TPS561201. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS561201 use?
Most are built on STM32 (12).
How big is a typical board using the TPS561201?
The median is 68 × 58 mm, and 8% are two-layer designs.
What is the most popular open source board using the TPS561201?
By GitHub stars, Adam psu by AkBKukU, with 11 stars.
Can I simulate one of these boards using the TPS561201 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.