7 open source boards using the TPS56528DDA
Real designs built with the TPS56528DDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
V1
manyetox
50 × 50 mm178 parts8LCC-BY-NC-4.01STM32
SplitBoard8Voice
hsetlik
310 × 199 mm517 parts4LNo license0STM32
HUMA-Rocket-Flight-Computer
manyetox
51.9 × 113.8 mm150 parts6LNo license0PowerBoard
codujla
58.7 × 31 mm30 parts4LNo license0ESP32
Robot aio esp32 manuel solder 8 layer
manyetox
50 × 46.2 mm54 parts8LCC-BY-NC-4.01STM32
LowerBoard1v2
hsetlik
310 × 110 mm284 parts4LNo license0ESP32
Robot aio esp32 manuel solder 8 layer updated with 3.3 lineer
manyetox
50 × 46.2 mm54 parts8LCC-BY-NC-4.01
The TPS56528DDA in open source designs
The gallery holds 7 open source boards using the TPS56528DDA from 4 GitHub repositories; a typical one measures about 51.8 × 50 mm and carries around 150 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is V1 by manyetox.
What boards using the TPS56528DDA are built for
TPS56528DDA: common questions
Where can I find a TPS56528DDA reference design?
Each of the 7 boards on this page is a real design using the TPS56528DDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS56528DDA use?
Most are built on ESP32 (3) and STM32 (3).
How big is a typical board using the TPS56528DDA?
The median is 51.8 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS56528DDA?
By GitHub stars, V1 by manyetox, with 1 stars.
Can I simulate one of these boards using the TPS56528DDA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.