2 open source boards using the TPS62160DGK
Real designs built with the TPS62160DGK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp32-can iot
NewTec-GmbH
87.5 × 70 mm63 parts2LBSD-3-Clause50Orca one
Finn254254
73 × 66 mm96 parts4LCERN-OHL-S-2.00
The TPS62160DGK in open source designs
The gallery holds 2 open source boards using the TPS62160DGK from 2 GitHub repositories; a typical one measures about 80.3 × 68 mm and carries around 80 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Esp32-can iot by NewTec-GmbH.
Microcontrollers on boards using the TPS62160DGK
What boards using the TPS62160DGK are built for
TPS62160DGK: common questions
Where can I find a TPS62160DGK reference design?
Each of the 2 boards on this page is a real design using the TPS62160DGK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS62160DGK use?
Most are built on ESP32 (1).
How big is a typical board using the TPS62160DGK?
The median is 80.3 × 68 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS62160DGK?
By GitHub stars, Esp32-can iot by NewTec-GmbH, with 50 stars.
Can I simulate one of these boards using the TPS62160DGK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.