3 open source boards using the TPS62840
Real designs built with the TPS62840, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SenseCam rev1
Appiko
45 × 70 mm62 parts2LCERN-OHL-1.22Externals-WL-Hardware
COSMIIC-Community
66 × 30 mm100 parts4LCERN-OHL-P-2.00ESP32
Mini ereader
Craft-Code-Systems
66 × 115 mm57 parts4LMIT0
The TPS62840 in open source designs
The gallery holds 3 open source boards using the TPS62840 from 3 GitHub repositories; a typical one measures about 66 × 70 mm and carries around 62 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is SenseCam rev1 by Appiko.
Parts used alongside the TPS62840
What boards using the TPS62840 are built for
TPS62840: common questions
Where can I find a TPS62840 reference design?
Each of the 3 boards on this page is a real design using the TPS62840. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS62840 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the TPS62840?
The median is 66 × 70 mm, and 33% are two-layer designs.
What is the most popular open source board using the TPS62840?
By GitHub stars, SenseCam rev1 by Appiko, with 2 stars.
Can I simulate one of these boards using the TPS62840 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.