5 open source boards using the TPS76318

Real designs built with the TPS76318, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPS76318

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS76318 connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF).
  • The VIN pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF.
  • The EN pin is tied to 3.3V on 4 of 5 designs.
VINpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 1 µF (4)
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 3.3V 80% · not connected 20%
NCpin 4Connected to: Not connected 100%
VOUTpin 5Connected to: 1.8V 80% · a signal 20%
  • Decoupling capacitor on 100% · 10 µF (2), 4.7 µF (2), 100 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include QMTech-MiSTeX by MiSTeX-devel, PmodUsbUlpi by twam, Trackball lt6c by lambdakb and Trackball lt7dk by lambdakb.

The TPS76318 in open source designs

The gallery holds 5 open source boards using the TPS76318 from 5 GitHub repositories; a typical one measures about 62 × 66.4 mm and carries around 27 components.

80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is QMTech-MiSTeX by MiSTeX-devel.

Parts used alongside the TPS76318

Microcontrollers on boards using the TPS76318

What boards using the TPS76318 are built for

TPS76318: common questions

Where can I find a TPS76318 reference design?

Each of the 5 boards on this page is a real design using the TPS76318. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS76318 VOUT pin?

The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the TPS76318.

What decoupling capacitors do designs use on the TPS76318 VIN pin?

The VIN pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the TPS76318.

How is the TPS76318 EN pin connected?

The EN pin is tied to 3.3V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS76318.

Which microcontrollers do boards using the TPS76318 use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the TPS76318?

The median is 62 × 66.4 mm, and 80% are two-layer designs.

What is the most popular open source board using the TPS76318?

By GitHub stars, QMTech-MiSTeX by MiSTeX-devel, with 73 stars.

Can I simulate one of these boards using the TPS76318 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part