6 open source boards using the TUSB321RWBR

Real designs built with the TUSB321RWBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The TUSB321RWBR in open source designs

The gallery holds 6 open source boards using the TUSB321RWBR from 5 GitHub repositories; a typical one measures about 70 × 60 mm and carries around 119 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Cm4-baseboard by antmicro.

Microcontrollers on boards using the TUSB321RWBR

What boards using the TUSB321RWBR are built for

TUSB321RWBR: common questions

Where can I find a TUSB321RWBR reference design?

Each of the 6 boards on this page is a real design using the TUSB321RWBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TUSB321RWBR use?

Most are built on Raspberry Pi (2), ESP32 (1) and STM32 (1).

How big is a typical board using the TUSB321RWBR?

The median is 70 × 60 mm, and 0% are two-layer designs.

What is the most popular open source board using the TUSB321RWBR?

By GitHub stars, Cm4-baseboard by antmicro, with 36 stars.

Can I simulate one of these boards using the TUSB321RWBR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part